GENERAL INFORMATION
Mounting Module | Side entry from 42- 60Ø Spigot entry 100mm Wall console (optional) |
Standard Tilt Angles | Side entry 0 |
Operating Temperature | -30 °C / +70°C |
Storage Temperature | -40°C / +80°C |
Electrical Kit | Removable kit Tool free removable kit (optional) |
Light Output | HSE/ HST HME |
Main Reference Company Standards | EN 60598-1, EN 60598-2-3,EN 61347-2-9, EN 60923, EN 61048,EN 61049,EN 60926, EN 60068-2-11, EN60068-2-52, ISO9227, ASTMB117, EN 60529, EN 62262, ANSIC136.10-2017, ANSI C136.2-2018, ISO9001, ISO14001, ISO18001, ISO50001, TURKAK, ISO45001, ISO39001, EAC |
ELECTRICAL INFORMATION
Electrical Class | Class I, Class II (optional) |
Nominal Voltage | 220-240V 50 Hz CCG EU 220-240V 60 Hz CCG EU (Optional) |
Gear | Conventional |
Lamp Power | 250W HSE/HST 250W HME |
Power Factor | ≥0.95 |
Ignitor | Cut-out type 5 min.(optional) Cut-out type 10 min.(optional) Cut-out type 20 min.(optional) |
Capacitor | Decharging resistor (optional) |
Control Options | On-off (standard) |
Mains Connection | For cable max section 2,5 mm2 Outgoing cable H05RN-F 2/3/5 x 1,5 mm2 (optional) Length on request.(optional) |
Electromagnetic Compatibility (EMC) For Electronic Ballast | IEC 61000, EN 55015, IEC 61000-3-2, IEC 61000-4-5, IEC 61547, IEC 61000-3-3, IEC 61000-4-2, IEC 61000-2-2, I EC 61000-4-11, IEC 61643-11 |
HOUSING AND MATERIALS
Housing | Anodised polester painted press aluminium |
Pole Mounting Module | Non-corresive die-cast aluminium |
Gasket | Silicon or polyurethane without junction points |
Housing Finish | UNI EN1706 powder painted |
Refractor | Acrylic (PMMA) Polycarbonate (PC) (optional) |
Cable Gland | IP65 cable entry gasket IP65 Plastic PG13,5 (optional) |
Standard Colour | RAL9007 |
Tightness Level | IP65 |
Impact Glass Resistance | IK08 (5 J) IK09 (optional) (10 J) |
Vibration Test | Compliant with modified IEC 68-2-6 (0.5G), ANSI C136.31 (3G-5G) |
OPTICAL INFORMATION
Socket | E40 |
Upward Light Output Ratio (ULOR) | 0% |
Testing standard | EN 13032-1 / EN 13032-2 |
Reflector | Three parted high purity anodised and polished aluminium with hammered surface |
Main Application