You are here:



Mounting ModulePost top or side entry from 25-45Ø
Post top or side entry from 42- 60Ø
Post top or side entry from 60-76Ø (optional)
Spigot entry 100mm
Mounting Module
Tilt Angles
Post top/side entry 0, +-5,+-10, +-15
Operating Temperature-40°C / +55°C
Storage Temperature-40°C / +80°C
Glass Mounting
Capsule mounting system
Tool-free clips system (optional)
LED ModulesRemovable / Replaceable optical unit
Lens OptionsCOL 1030 (standard)
Project-specific lens selection
Main Reference
Company Standards
EN 62717, EN 62722-1, EN 62722-2-1, EN 60598-1, EN 60598-2-3, EN 62471, EN 60068-2-11, EN60068-2-52, ISO9227, ASTMB117, ASTMD3359-78, ISO 4628-2, ISO 4628-4, EN 60529, EN 62262, ANSIC136.10-2017, ANSIC136.2-2018, EN 62031, IEC 62384, ASTMD3359, EN ISO 2409, IES LM 80-15, IES LM 82-12, IES LM 84-14, IES LM 85-14, LM 79-19, IES TM 21-11, CE, CB, RoHS , ISO9001, ISO14001, ISO18001, ISO5001, ISO45001, ISO39001, EAC, TURKAK


Electrical ClassClass I, Class II (optional)
Nominal Voltage220-240V 50 / 60 Hz EU
110-277V 50 / 60 Hz (optional) NORTH AMERICA
Led Current350 mA, 500 mA, 700 mA, 925 mA, 1050 mA
LED Lamp Power25W, 36W, 50W, 55W, 70W, 75W, 80W, 110W, 140W, 160W
Power Factor≥0.9 (at full load)
DriverConstant current, thermal protected,
voltage regulated, harmonic filter protection
Surge protection
options (kV)
6 Kv (standard)
10 kV (optional) with LED signal and thermo
fuse to disconnect load at the end of life
20 kV (optional) with LED signal and thermo
fuse to disconnect load at the end of life
Control systemon-off (standard), Bluetooth, DALI, 1-10V DIM,
stand alone automation
SocketNEMA 4-pin (ZHAGA book 18) (optional)
NEMA 5-pin (ANSI C136.41) (optional)
NEMA 7-pin (ANSI C136.41) (optional)
SensorPIR (optional), Photocell (optional), Daylight (optional)
Mains connectionFor cable max section 2,5 mm2
Outgoing cable H05RN-F 2/3/5 x 1,5 mm2
Length on request.(optional)
IEC 61000, EN 55015, IEC 61000-3-2, IEC
61000-4-5, IEC 61547, IEC 61000-3-3, IEC
61000-4-2, IEC 61000-2-2, IEC 61000-4-11,
IEC 61643-11


HousingNon corressive high pressure die-cast aluminium
OpticPMMA or PC
Gasket Silicon or polyurethane without junction points
Housing FinishUNI EN1706 powder painted
RefractorTempered glass min. 4mm high transparecy
UV resistant (optional)
Cable GlandIP66, Plastic M20X1,5, IP67 (optional), IP68 (optional)
Standard ColourRAL7021 Metalic
Tightness LevelIP66, IP67 (optional), IP68 (optional)
Impact Housing ResistanceIK10 (20 J)
Impact Glass ResistanceIK08 (5 J), IK09 (optional) (10 J),
IK10 (optional) (20 J)
Vibration TestCompliant with modified IEC 68-2-6 (0.5G),
ANSI C136.31 (3G-5G)


Led colour
2700K (warm white), 3000K (warm white),
4000K (neutral white) (standard), 5000K
(cool white), 5700K (cool white), 6500K (cool
white), Other (amber, blue, green, red)
Colour rendering
ındex (CRI)
CRI ≥70, CRI ≥80 (optional), CRI ≥90 (optional)
Upward light
output ratio
safety class
IEC 62471, EN 62778 EXEMPT GROUP
Testing standardLM 79-19 , EN 13032-1 (all measurements in
ISO17025 accredited laboratory)
Lifetime of the
Tq= 25 ° , 700 Ma 187.000h - L90B10
Tq= 55 ° , 700 Ma 156.000h - L90B10

Main Application