GENERAL INFORMATION
| Mounting Module | Post top or side entry from 25-50Ø Post top or side entry from 42- 60Ø Spigot entry 100mm Wall console (optional) |
| Standard Tilt Angles | Post top/side entry 0° |
| Operating Temperature | -30 °C / +70°C |
| Storage Temperature | -40°C / +80°C |
| Electrical Kit | Removable kit Tool free removable kit (optional) |
| Light Output | HSE/ HST |
| Main Reference Company Standards | EN 60598-1, EN 60598-2-3,EN 61347-2-9, EN 60923, EN 61048,EN 61049,EN 60926, EN 60068-2-11, EN60068-2-52, ISO9227, ASTMB117, ASTMD3359-78, ISO 4628-2, ISO 4628-4, EN 60529, EN 62262, ANSIC136.10-2017, ANSI C136.2-2018, ASTM D3359, EN ISO 2409, ISO9001, ISO14001, ISO18001, ISO50001, TURKAK, ISO45001, ISO39001, EAC |
ELECTRICAL INFORMATION
| Electrical Class | Class I, Class II (optional) |
| Nominal Voltage | 220-240V 50 Hz CCG EU 220-240V 60 Hz CCG EU (Optional) |
| Gear | Conventional Bi-Level Conventional |
| Lamp Power | 250W HSE/HST 400W HSE/HST 600W HSE/HST |
| Power Factor | ≥0.95 |
| Ignitor | Cut-out type 5 min.(optional) Cut-out type 10 min.(optional) Cut-out type 20 min.(optional) |
| Capacitor | Decharging resistor (optional) |
| Control Options | On-off (standard) Line swich bi-level control (optional) Auto bi-level control (optional) |
| Mains Connection | For cable max section 2,5 mm2 Outgoing cable H05RN-F 2/3/5 x 1,5 mm2 (optional) Length on request.(optional) |
HOUSING AND MATERIALS
| Housing | Non corressive high pressure die-cast aluminium |
| Pole Mounting Module | Non-corresive die-cast aluminium |
| Gasket | Silicon or polyurethane without junction points |
| Housing Finish | UNI EN1706 powder painted |
| Refractor | Tempered glass min. 4mm high transparecy UV resistant (optional) |
| Reflector | One-piece pressed anodised and polished high grade aluminium |
| Cable Gland | IP66 ,Plastic PG13,5, IP67 (optional) |
| Standard Colour | RAL9007 |
| Tightness Level | IP66 |
| Impact Housing Resistance | IK09 (10 J) |
| Impact Glass Resistance | IK08 (5 J), IK09 (optional) (10 J), IK10 (optional) (20 J) |
| Vibration Test | Compliant with modified IEC 68-2-6 (0.5G), ANSI C136.31 (3G-5G) |
OPTICAL INFORMATION
| Socket | E40 |
| Socket Position | 3 different light beam position |
| Upward Light Output Ratio (ULOR) | 0% |
| Testing Standard | EN 13032-1 / EN 13032-2 |
| Reflector | CR1200 CR2200 (Aluminium Injection)(Optional) |
Main Application
